Flat top conveyor belt suppliercan-industry

series E31 CONVEYOR BELT MODULAR PLASTIC

SPROCKETS FOR CONVEYOR BELT E31

Belt date

Sprockets data 

SERIES E31 has a 30 mm pitch and a mould-to-width configuration of 152.40 mm wide. For applications in which a different width is required, please 

ask Rellwin directly.

It has been designed for carrying out dynamic lateral transfers of containers in perpendicular intersections of lines.

Its bevelled edge reduces the distance between the belts taking part in the transfer no need of using finger plates, dead plates or other transfer 

accessories. The typical applications of SERIES E31 are lines of lateral movement of containers, at the infeed or outfeed of accumulation tables, 

or any other application that requires economizing space in the turns.

Series E31 Lateral Transfer, with a one-only-piece geometry 152.4 mm wide, is bevelled in one of its side edges to enable the approach to the belt

 delivering the product, as well as down-tracking tabs in order to assure its alignment. This conveyor belt has been designed to carry out lateral 

dynamic transfers of containers in perpendicular crossing lines.

In the past the beverage bottling industry was very noisy due to the use of metallic chains working at high speed. Nowadays the plastic modular belt

 system reduces the noise rate at very acceptable levels.

The use of metallic chains also entailed a high cost in mechanical maintenance, as well as a great consumption of lubricants for decreasing the friction 

coefficient in order to avoid their premature wear. The maintenance cost of the plastic materials used for manufacturing the modular belts is the lowest, as they do not need any lubrication, which avoids not only the lubricant expenditure, but also the rejection of bottles due to their 

impregnation with those liquids.

This belt offers a new and unique solution for sideflexing applications in plants with modular conveyor belts. The beltbelt is best suitable for conveying

 glass and PET containers(for example pet bottles with petaloid base).

BENEFITS

-high strength and heavy duty flight design.

-standardisation in conveyor design.

-optimum product stability.

These belt used in a variety of industries including manufacturing, assembly, and packaging, for example, cosmetics, foodstuffs, paper, electrical and 

Electronic sectors, mechanical, chemical and automotive 

Our company has been qualified with ISO 9001:2000 quality system. The production strictly complies with the standard and procedures of ISO 9001, which 

ensures good product quality.

If you are interested in our products, please feel free to contact us.

modular belts are constructed with modules molded from thermoplastic materials connected with soild plastic rods. Except for narrow belts (one 

complete module or less in width),all are built with the joints between modules staggered with those of adjacent rows in a "bricklayed" fashion. This structure

 can enhance transverse strength and it is easy for maintain.

The total plastic and cleanable design can solve the steel belts easily polluted.Now the cleanable design makes the belts very suitable for food industry 

area as well.Also there are be widely used in many other industries,such as container making,pharmaceutical and automotive,lines of battery and so on.

Rellwin company has a widely range of different material and structure belts. The range of Rellwin's modular belts varies from 3/8 inch small pitch 

straight running belts to 2inch pitch sideflexing belts,The most commonly used belt styles inclued:

Flat Top:suitable for a wide range of products,when a fully closed belt surface is preferred.

Flush Grid:commonly used in applications where drainage or airflow is desired.

Raised Rib:recommended in applications where product stability over transfers is a concern.

Friction Top:commonly employed on incline conveyors, where the elevation of product changes.Friction Top modular belts can be used up to an angle of 20 degrees,depending on the pack style and material.

Roller Top:used in a variety of low-pressure accumulation applications.

Perforated Flat Top:used when air flow and water flow are critical but the percentage of belt open area must remain low.Other,less frequently used belt 

styles may better fit your special requirements:Open Grid,Nub Top(anti-stick),Cone Top(extra grip).

The material of the E31 conveyor chain are POM and all of them have a transport direction of flexibility,low coefficient of friction and has long lifetime.The 

characters of the products are easily installation and maintenance and high mechanical strength as well as excellent product handing.Besides,E31 conveyor 

chains normally in food cans,glass products,milk cartons,as well as the bread conveying.The different type can be available as your requirement, thus as

 long as you give me the drawing or detailed specification,everything is OK.So CN-CHAINS has the products to suit any customer requirement.

Our services


1. Warranty time: 1 year.  The conveyor belt / chains / sprockets which supplied by our company could be exchanged when it have quality problems,such as it was broken in installing , the pin run out from chains or the chains parted . But if the user use it in a wrong way, we can not provide any goods for free .

2. Payment: T/T , L/C , Western Union or Paypal .

3. Lead time: 5~15 working days, subject to the order quantity.

4. Shipment: by sea, by air,door to door service for samples transportation.

5. OEM service : we have our own R.D team . If you want to purchase the belt which we have not or you have your own design , we would like to make mold for you for free , only have the condition of requiring continuous orders ,and first order must be more than 60 square meters .

Company and Productsinformationrelated:
Ningbo Rellwin IndustryCo.,ltd