Rasied rib modular conveyor belt for transport line

plastic conveyor belt wholesales

Belt date

Sprockets data

Series E41 Raised Rib conveyor belt, given its configuration of projecting ribs, enables us to make product transfers by using finger plates.
The central reinforcement of the ribs allows the lateral entrance of cans, glass jars, or containers in general, avoiding their overturning as well as any damage in the belt surface. It is the conveyor belt of the pasteurizers par excellence.

Transportation and daily maintenance of plastic conveyor belt

During storage, the product must be placed into a roll not folded, turning once during placement should be on a quarterly basis

2.Different type, size layers together using the belt should

3.Type conveyor belt, structure, size, number of layers should be a reasonable choice according to the conditions

4.Feed direction along the direction of the tape should be, in order to reduce the impact on the whereabouts of the tape should be taken when the material chute, reducing materials falling distance

Conveyor belt in use should note the following

1.Avoid roller is covered with material, resulting in ineffective rotation to prevent leakage of material between the roller and the tape card, pay attention to the lubrication of moving parts,

2.Avoid starting with a over load

Feature of Plastic modular conveyor belt 

Plastic modular conveyor belt using belt injection splicing, and with supporting the drive sprocket, with no deviation drive replacement easier cleaning 

characteristics.Plastic mesh belt drive module is stuck in the belt sprocket sprocket grooves are opposite the corresponding drive, so no deviation.

Plastic modular conveyor belt is easier to replace because it is wearing a matching pin assembled, it can be based on partial replacement of damaged parts, 

it is unnecessary to replace the whole one , to save a certain amount of expenses.Plastic modular belt is relatively flat and smooth surface, can be directly 

rinsed with water and wash with some tools.Plastic materials have arbitrarily chosen to achieve and satisfy the conditions customers, there are 

food-grade plastic belt and high temperature plastic mesh and plastic mesh belt wear and rally.Is a new type of environmentally friendly technology 

conveyor ideal supplies. Plastic mesh is also called plastic modular belt belt is the introduction of foreign advanced technology, using molds for injection

 molding and then stitched together according to customer demand.

Plastic belt is the use of engineering plastics production belt plate assembly made of modular belt with interlocking brickway interleaved mode or by the 

total length of the pin assembly together, this design is fundamentally improve the conveyor belt strength.Flights and side panels can also be interlocked 

with the hinge pin has become integral parts of the conveyor belt. Plastic belt has too much forms, assembling flexible, easy to replace. There are openings in

 the form, flat, ribs, ball, slip and other forms. Apply to pigs, sheep, chickens, ducks slaughtered , cutting and processing, puffed food production line,

 fruit grading, packing lines, fish processing production line, frozen food production line, battery manufacturing, beverage manufacturing, canning 

industry, agro-industry, chemical industry , electronics, rubber and plastic manufacturing industry, the cosmetics industry, the general transport operations

Advantage

  Precision molding process ensures optimum flatness.

  High wear resistance and low friction coefficient

  High work load

Our services


1. Warranty time: 1 year.  The conveyor belt / chains / sprockets which supplied by our company could be exchanged when it have quality problems,such as it was broken in installing , the pin run out from chains or the chains parted . But if the user use it in a wrong way, we can not provide any goods for free .

2. Payment: T/T , L/C , Western Union or Paypal .

3. Lead time: 5~15 working days, subject to the order quantity.

4. Shipment: by sea, by air,door to door service for samples transportation.

5. OEM service : we have our own R.D team . If you want to purchase the belt which we have not or you have your own design , we would like to make mold for you for free , only have the condition of requiring continuous orders ,and first order must be more than 60 square meters .

Company and Productsinformationrelated:
Ningbo Rellwin IndustryCo.,ltd.