supply Flush Grid conveyor belt in China factory

Belt date

Sprockets data 

 Series E30 Flush Grid has a grille-shaped configuration with a 41% open area and a completely smooth surface. This conveyor belt is ideal for 

applications in which drainage through the belt is needed, avoiding accumulation of any particle on its surface.

Its cleaning is very easy by applying air or water under pressure.

This conveyor belt can be used in vegetable and wine industry

Vegetables

After the industrialization of land work, processes that were manual in the past have been automated gradually and modular belts have greatly contributed

 to it.Present even in the product harvest, placed in mobile trailers to make the first selection, they convey the vegetable products during all the production 

process: washing, selecting, blanching, boiling, cooling, bagging, etc.Since these products bring with them abrasive elements, like mud, stones, and sand, 

EUROBELT, in collaboration with its plastic raw material suppliers, is devoted to the continuous search of materials more resistant to abrasion in order to

 achieve a longer life for its belts

Wine

The current methods for producing wine are far away from those used by our ancestors. Nowadays, derived from complex and costly technical studies,

 meticulous systems of detailed care are carried out regarding the soil, the plant, the fruit, and, of course, its transformation in wine in order to 

obtain the best quality.
But for all this, it is essential a conveying and handling aseptic system for cooling the grapes, selecting them, and carrying them to the destemmer with

 the care and asepsis required by the most demanding quality control.Our modular belts have been carrying out this task in this selective industry 

successfully for some years, so that they are installed in the most famous wineries.

Transportation and daily maintenance of plastic conveyor belt

During storage, the product must be placed into a roll not folded, turning once during placement should be on a quarterly basis

2.Different type, size layers together using the belt should

3.Type conveyor belt, structure, size, number of layers should be a reasonable choice according to the conditions

4.Feed direction along the direction of the tape should be, in order to reduce the impact on the whereabouts of the tape should be taken when the material

 chute, reducing materials falling distance

Conveyor belt in use should note the following

1.Avoid roller is covered with material, resulting in ineffective rotation to prevent leakage of material between the roller and the tape card, pay attention to the

 lubrication of moving parts,

2.Avoid starting with a over load

Feature of Plastic modular conveyor belt 

Plastic modular conveyor belt using belt injection splicing, and with supporting the drive sprocket, with no deviation drive replacement easier cleaning

 characteristics.Plastic mesh belt drive module is stuck in the belt sprocket sprocket grooves are opposite the corresponding drive, so no deviation.

Plastic modular conveyor belt is easier to replace because it is wearing a matching pin assembled, it can be based on partial replacement of damaged parts,

it is unnecessary to replace the whole one , to save a certain amount of expenses.Plastic modular belt is relatively flat and smooth surface, can be directly

 rinsed with water and wash with some tools.Plastic materials have arbitrarily chosen to achieve and satisfy the conditions customers, there are

 food-grade plastic belt and high temperature plastic mesh and plastic mesh belt wear and rally.Is a new type of environmentally friendly technology 

conveyor ideal supplies. Plastic mesh is also called plastic modular belt belt is the introduction of foreign advanced technology, using molds for injection 

molding and then stitched together according to customer demand.

Our services


1. Warranty time: 1 year.  The conveyor belt / chains / sprockets which supplied by our company could be exchanged when it have quality problems,such as it was broken in installing , the pin run out from chains or the chains parted . But if the user use it in a wrong way, we can not provide any goods for free .

2. Payment: T/T , L/C , Western Union or Paypal .

3. Lead time: 5~15 working days, subject to the order quantity.

4. Shipment: by sea, by air,door to door service for samples transportation.

5. OEM service : we have our own R.D team . If you want to purchase the belt which we have not or you have your own design , we would like to make mold for you for free , only have the condition of requiring continuous orders ,and first order must be more than 60 square meters .

Company and Productsinformationrelated:
Ningbo Rellwin IndustryCo.,ltd.