Belt surface: Open belt with a smooth surface.

Open area: 40%. Biggest opening 4 x 8 mm.

Strength: Ideal choice for light transportation.

Material/colour: POM/NAT

Cleanability: Excellent. FSIS

Accessories:

Application: Transport of product s that require a very small

transfer.

Standard widths: Increments of 40 mm, e.g. 200 mm, 240 mm.

06-401 will run over a nose-bar of ¼", substituting traditional flat belts in applications where a very tight transfer is required. The positively driven 

modular belt will reduce service- and downtime required to adjust and align flat belts, and the problem of fraying is eliminated.

FLUSH GRID MODULAR CONVEYOR BELT

Sprockets for 06-401

Belt surface: Open belt with a smooth surface.

Open area: 40%. Biggest opening 4 x 8 mm.

Strength: Ideal choice for light transportation.

Material/colour: POM/NAT

Cleanability: Excellent. FSIS

Accessories:

Application: Transport of product s that require a very small

transfer.

Standard widths: Increments of 40 mm, e.g. 200 mm, 240 mm.

Modular belts are constructed with modules molded from thermoplastic materials connected with soild plastic rods. Except for narrow belts (one 

complete module or less in width),all are built with the joints between modules staggered with those of adjacent rows in a "bricklayed" fashion. This 

structure can enhance transverse strength and it is easy for maintain.
The total plastic and cleanable design can solve the steel belts easily polluted.Now the cleanable design makes the belts very suitable for food industry 

area as well.Also there are be widely used in many other industries,such as container making,pharmaceutical and automotive,lines of battery and so on.
Rellwin company has a widely range of different material and structure belts. The range of Rellwin's modular belts varies from 3/8 inch small pitch 

straight running belts to 2inch pitch sideflexing belts,The most commonly used belt styles inclued:
Flat Top:suitable for a wide range of products,when a fully closed belt surface is preferred.
Flush Grid:commonly used in applications where drainage or airflow is desired.
Raised Rib:recommended in applications where product stability over transfers is a concern.
Friction Top:commonly employed on incline conveyors, where the elevation of product changes.Friction Top modular belts can be used up to an angle of 20 degrees,depending on the pack style and material.
Roller Top:used in a variety of low-pressure accumulation applications.
Perforated Flat Top:used when air flow and water flow are critical but the percentage of belt open area must remain low.
Other,less frequently used belt styles may better fit your special requirements:Open Grid,Nub Top(anti-stick),Cone Top(extra grip).

modular conveyor belt Rellwin belts are made of plastic modules. Belts are assembled in an interlocked, bricklayed pattern with full-length hinge rods – an inherently strong design. 

strong and reliable
The 06-401belt has increased performance in the following industries/applications:
1. Bakery applications including pan handling and incline/decline box or pan applications.
2. Meat or poultry applications including packaging lines and incline box conveyors.
3. Beverage applications including depalletizers, accumulation tables and incline case conveyors.
4. Can manufacturing applications including palletizers, mass handling and accumulation tables.
5. Corrugated applications including downstacker, corrugator take off, transfer car and WIP storage.
6. Tire applications including wigwag, extruder takeaway and inspection applications.
7. Material handling applications including incline applications, palletizers and packaging lines.

We are China modular belt manufacturer offer best modular belt OEM, ODM,service.

Plastic belt is the use of engineering plastics production belt plate assembly made of modular belt with interlocking brickway interleaved mode or by the 

total length of the pin assembly together, this design is fundamentally improve the conveyor belt strength.Flights and side panels can also be interlocked 

with the hinge pin has become integral parts of the conveyor belt. Plastic belt has too much forms, assembling flexible, easy to replace. There are 

openings in the form, flat, ribs, ball, slip and other forms. Apply to pigs, sheep, chickens, ducks slaughtered , cutting and processing, puffed food production 

line, fruit grading, packing lines, fish processing production line, frozen food production line, battery manufacturing, beverage manufacturing, canning 

industry, agroindustry, chemical industry , electronics, rubber and plastic manufacturing industry, the cosmetics industry, the general transport operations

Advantage

  Precision molding process ensures optimum flatness.

  High wear resistance and low friction coefficient

  High work load

PVC conveyor belt,PU conveyor belt,Polyethylene (PE)conveyor belt,plastic chain plate conveyor belt,modular conveyor belt,PP conveyor belt,Nylon

 conveyor belt,Stainless steel conveyor belt.

Our services


1. Warranty time: 1 year.  The conveyor belt / chains / sprockets which supplied by our company could be exchanged when it have quality problems,such as it was broken in installing , the pin run out from chains or the chains parted . But if the user use it in a wrong way, we can not provide any goods for free .

2. Payment: T/T , L/C , Western Union or Paypal .

3. Lead time: 5~15 working days, subject to the order quantity.

4. Shipment: by sea, by air,door to door service for samples transportation.

5. OEM service : we have our own R.D team . If you want to purchase the belt which we have not or you have your own design , we would like to make mold for you for free , only have the condition of requiring continuous orders ,and first order must be more than 60 square meters .

Company and Productsinformationrelated:
Ningbo Rellwin IndustryCo.,ltd.